Field & RangeCLP (Clean, Lube, Protect)

Field & Range CLP Wipes & Patches

Lint-free wipes and patches pre-saturated with Field & Range CLP. Clean, lubricate and protect with no bottles or extra liquid. Built for the range bag, glove box and quick post-shoot wipe downs.

Use on

  • Exterior metal and finishes
  • Slides, bolts and carriers
  • Bores (pre-saturated patches)
  • Optic mounts, knives and tools

Directions

  1. Before any maintenance, make sure the firearm is unloaded: remove the magazine, lock the action open, and visually and physically check the chamber. Keep all ammunition out of the work area.
  2. Pull one wipe from the canister and close the lid tightly so the rest stay saturated.
  3. Wipe down the slide, frame, receiver, bolt or carrier to lift carbon and fouling. Fold to a clean section as it gets dirty.
  4. Bore: push a pre-saturated patch through the bore with a rod and jag, then follow with dry patches until clean.
  5. Finish with a light pass over all exterior surfaces to leave a protective film. Discard used wipes and patches.

Tips

  • Keep a 10-pack in your range bag for a wipe down before you case the gun.
  • Great for knives, multi-tools and optics mounts too.

Products in this guide

Field & Range Saturated Wipes (75 Count) - Clenzoil Unlimited
Clenzoil CLP – Field & Range – Pre-Saturated Single-Use Wipes 10-Pack
Field & Range Patch Kit - Clenzoil Unlimited

Pairs well with

Clenzoil CLP - Field & Range - 8 oz Trigger Sprayer
Clenzoil Bore Stix – CLP-Infused – Available for .22, 9MM, .40, .45 Cal
Firearm Protective Sleeve - Clenzoil Unlimited
Firearm Protective Sleeve Sale price$10.49