Field & RangeCLP (Clean, Lube, Protect)

Field & Range Bore Stix

Caliber-specific cotton swabs on flexible bamboo handles, pre-saturated with Field & Range CLP. Clean a pistol barrel without full disassembly.

Use on

  • Pistol and revolver barrels
  • Chambers
  • Revolver cylinders

Directions

  1. Before any maintenance, make sure the firearm is unloaded: remove the magazine, lock the action open, and visually and physically check the chamber. Keep all ammunition out of the work area.
  2. Lock the slide or open the action. Choose the Bore Stix that matches your caliber.
  3. Insert the saturated tip at the chamber end where possible and push it through the bore with a slight twist.
  4. Repeat with a fresh Bore Stix until the tip comes out clean.
  5. Finish with a dry Stix or dry patch to remove excess. Bore Stix are single use; discard after use.

Tips

  • Revolvers: run one through each chamber of the cylinder.
  • Calibers: .22/5.56, .38/9mm, .40/10mm, .44/.45.

Products in this guide

Clenzoil Bore Stix – CLP-Infused – Available for .22, 9MM, .40, .45 Cal

Pairs well with

Clenzoil CLP – Field & Range – Pre-Saturated Single-Use Wipes 10-Pack
Pistol Essentials Kit - Clenzoil Unlimited
Clenzoil Pistol Cleaning Mat - 17"W x 12"H