Field & RangeCleaners

Ultrasonic Solution

Gun parts cleaning concentrate made for ultrasonic cleaners. With high-frequency sound waves it removes carbon, powder buildup, dirt, oil, grease and other residue. Safe for all firearm finishes and non-corrosive to aluminum and metal parts.

Use on

  • Actions and receivers
  • Trigger assemblies
  • Bolts and slides
  • Small parts

Directions

  1. Before cleaning, always make sure the firearm is unloaded. Do not soak the firearm or parts overnight in this solution.
  2. Dilute the concentrate 1:5 (1 part solution to 5 parts water).
  3. Disassemble the firearm according to the manufacturer's instructions.
  4. Remove any loose contaminants with a brush, wipe or other tool.
  5. Submerge the parts and set your cleaner's time and temperature (if applicable) to the manufacturer's recommended settings. Use the shortest effective cycle; 5 to 15 minutes is typical.
  6. When the cycle is complete, remove the parts and rinse with warm water.
  7. Dry thoroughly. Use compressed air if available to displace moisture.
  8. Relubricate moving parts and treat for corrosion prevention during storage.

Tips

  • Follow up with Synthetic Gun Oil on moving parts and Field & Range CLP for storage protection.

Products in this guide

Clenzoil Ultrasonic Solution - Field & Range - 1 Gallon

Pairs well with

Clenzoil Synthetic Gun Oil – Field & Range – 4 oz Squeeze Bottle
Clenzoil CLP - Field & Range - 8 oz Trigger Sprayer
Synthetic Gun Grease Syringe - Clenzoil Unlimited