Field & RangeCleaners

Suppressor Cleaner

Water-based, ready-to-use soak that removes heavy carbon, lead and copper fouling from suppressors. Free of ammonia, petroleum and corrosive agents, with no harmful or obnoxious fumes.

Use on

  • Suppressor tubes and baffles
  • Disassembled baffle stacks
  • Cerakote, anodized and nitride finishes

Directions

  1. Ready to use. Do not dilute.
  2. Detach the suppressor from the firearm. If your suppressor can be disassembled, you may use a cleaning cloth or tools on the interior components.
  3. Cerakote, anodized and nitride finishes: plug or seal the exit end of the suppressor so that it is water tight.
  4. Carefully pour Clenzoil Suppressor Cleaner inside the suppressor through the threaded end. Wipe off any excess on the finished surface.
  5. Let soak. Soak time depends on how often you clean and the level of buildup. Maximum soak need not exceed 24 hours.
  6. When the soak is complete, unplug and drain the suppressor and rinse with water.
  7. Dry thoroughly. Use compressed air if available to displace moisture.
  8. All other finishes: spray or pour Suppressor Cleaner inside the suppressor, or fully submerge it in a cleaning reservoir, then follow the soak, rinse and dry steps above.

Tips

  • The first several rounds fired after cleaning may release loosened deposits.
  • A soak tube makes full submersion simple.

Products in this guide

Clenzoil Suppressor Cleaner 16 oz heavy-duty soak bottle

Pairs well with

Clenzoil Carbon Cleaner 16 oz trigger sprayer
Double-Ended Brass Brush - Clenzoil Unlimited
Double-Ended Brass Brush Sale price$3.99
Clenzoil Synthetic Gun Oil – Field & Range – 4 oz Squeeze Bottle