Field & RangeCleaners

Copper Cleaner

Premium copper fouling remover. Ammonia and petroleum free, odorless and biodegradable. Chelating agents target copper deposits without harming bore steel and leave a film that helps slow future buildup.

Use on

  • Rifle bores
  • Pistol bores
  • Muzzle devices

Directions

  1. Before any maintenance, make sure the firearm is unloaded: remove the magazine, lock the action open, and visually and physically check the chamber. Keep all ammunition out of the work area.
  2. Remove carbon first with Carbon Cleaner or Field & Range CLP. Copper Cleaner works best on a carbon-free bore.
  3. Spray Copper Cleaner onto a patch and run it through the bore, chamber to muzzle. Let it soak for several minutes.
  4. Scrub with a nylon bore brush. Avoid bronze or brass brushes, which can react with copper removers.
  5. Push patches through. Discolored patches show copper coming out.
  6. Repeat soak, scrub and patch until patches come out clean.
  7. Dry the bore with clean patches, then finish with a lightly oiled patch of Synthetic Gun Oil or CLP.

Tips

  • Clean copper every few range trips on precision rifles to protect accuracy.

Products in this guide

Clenzoil Copper Cleaner - Field & Range - 4 oz Pump Sprayer

Pairs well with

Clenzoil Carbon Cleaner 16 oz trigger sprayer
Clenzoil Synthetic Gun Oil – Field & Range – 4 oz Squeeze Bottle
Premium Cotton Gun Cleaning Patches - Clenzoil Unlimited
Clenzoil Carbon Fiber Bore Cleaning Rod - Pistol