Field & RangeCleaners

Carbon Cleaner

High-strength, water-based carbon remover. Nearly colorless and odorless, non-flammable, petroleum and ammonia free. Lifts heavy carbon and powder residue and neutralizes corrosive residue without harming bore steel or finishes.

Use on

  • Bores and chambers
  • Bolt carrier groups and gas tubes
  • Suppressor mounts and muzzle devices
  • Choke threads and actions

Directions

  1. Before any maintenance, make sure the firearm is unloaded: remove the magazine, lock the action open, and visually and physically check the chamber. Keep all ammunition out of the work area.
  2. Field strip the firearm following the manufacturer's instructions.
  3. Spray Carbon Cleaner directly on fouled parts, or onto a patch or brush for the bore.
  4. Let it dwell for a few minutes. Heavier buildup needs a longer dwell.
  5. Scrub with a nylon or brass brush to release the loosened carbon.
  6. Wipe or patch clean, then dry thoroughly. Compressed air helps clear water from tight spots.
  7. Lubricate and protect with Clenzoil Synthetic Gun Oil or Field & Range CLP before reassembly.

Tips

  • Because it is water-based, always follow with oil or CLP. Bare steel should never be stored dry.
  • Gallon: refill your 16 oz or 8 oz trigger sprayer.

Products in this guide

Clenzoil Carbon Cleaner 16 oz trigger sprayer
Clenzoil Carbon Cleaner – Field & Range – 8 oz Trigger Sprayer
Clenzoil Carbon Cleaner – Field & Range – 4 oz Pump Sprayer
Clenzoil Carbon Cleaner – Field & Range – 2 oz Pump Sprayer
Clenzoil Carbon Cleaner - Field & Range - 1 Gallon

Pairs well with

Clenzoil Synthetic Gun Oil – Field & Range – 4 oz Squeeze Bottle
Clenzoil Copper Cleaner - Field & Range - 4 oz Pump Sprayer
Double-Ended Brass Brush - Clenzoil Unlimited
Double-Ended Brass Brush Sale price$3.99
Premium Cotton Gun Cleaning Patches - Clenzoil Unlimited